Black-top surfaces deteriorate from exposure to air, sun, rain, freezing weather and snow, from the wear of traffic and from the hardening of the asphalt surface. If this dry, weakened condition is not corrected, cracks and breaks soon appear. Moisture seeps in. The base becomes soft. Traffic churns it up. In low temperatures the moisture freezes and expands, causing unsightly, dangerous holes to develop. Expensive time-consuming replacement becomes necessary.

QUICK-DRY ASPHALT PENETRATING PAVING SEAL virtually eliminates this costly problem quickly, easily, inexpensively by sealing the surfaces with rejuvenating asphalt. The result is a pliable surface which gives protection and repels damaging moisture to extend the service life of the asphalt paved area.

Many paving sealers on the market only coat the black-top surface and are quickly worn off by everyday traffic. QUICK-DRY ASPHALT PENETRATING PAVING SEAL penetrates deeply into the asphalt surface establishing a tough bond and adding new asphalt life.

QUICK-DRY ASPHALT PENETRATING PAVING SEAL helps avoid expensive, time consuming black-top replacement. Preventive maintenance is quicker, easier and more economical. You save money by applying QUICKDRY ASPHALT PENETRATING PAVING SEAL the moment voids, hairline cracks, or other small breaks in an asphalt surface are detected. Early repairs help prevent future, more costly repairs from occurring due to neglect. For maximum service from asphalt paved surfaces, apply QUICK-DRY ASPHALT PENETRATING PAVING SEAL BEFORE cracks actually appear to save time, money and the black-top surface.

Newly laid asphalt surfaces should cure at least nine months before applying QUICK-DRY ASPHALT PENETRATING PAVING SEAL to allow for the proper setting up time.

QUICK-DRY ASPHALT PENETRATING PAVING SEAL comes ready to use. No heating. No thinning.

Under normal conditions, the area sealed with QUICK-DRY ASPHALT PENETRATING PAVING SEAL is dry to the touch within a few hours. A “trial run” may be made to determine the seal’s tackiness and whether the area is ready to normal traffic. Always allow extra curing time whenever possible.

QUICK-DRY ASPHALT PENETRATING PAVING SEAL should not be applied to new asphalt pavements (less than nine months) as softening may occur. Some asphalt pavements are highly absorbent. Test a small area to ensure optimum results