TEXOTROPIC
FIBERED ALUMINUM
ROOF COATING
Product Code #3040
(Formulation meets ASTM D-2824, Type III (Non-Asbestos)
| COLOR: | Soft Silver |
| DRY MIL THICKNESS: | 14 mils at 1½ gal. per 100 sq. ft. |
| APPLICATION METHOD: | Brush, Roller or Spray |
| RESISTANT TO: | Corrosion, Water and Water Vapor, Saturated solutions of various Salts, Sunlight. |
| WEATHERABILITY: | Good in Arid, Tropical and Cold Climates |
PHYSICAL REQUIREMENTS:
| Specific Gravity at 60°F | 0.98 |
| Weight per Volume at 60°F. | 8.16 lbs./gal. |
| Non-Volatile Matter, % by wt. | 55.0 |
| Viscosity, Brookfield @ 77°F, CPS | 8000 - 15000 |
| Flash Point, PMCC, min. (ASTM D-93) | 100 minimum |
| Consistency | Heavy Brush or Spray |
| Asphalt Content, % by wt. | 32.0 |
| Solvent Content, % by wt. | 36.0 |
| Water Content, % by wt. | Less than 0.4% |
| *Aluminum Pigment, % by wt. | 28.0 |
| Dessicant | 1.0 |
*ALUMINUM PIGMENT - - Meets Federal Specification TT-P-320, Type III, Class C.
NOTE: Read Carefully and Follow Application Instructions on Label.
| NOTE: Obvious roof defects should be properly repaired before TEXOTROPIC APPLICATION. Open seams, broken flashings, blisters and breaks in the roof should be permanently repaired with MIGHTYPLATE PLASTIC CEMENT and GLAS-WEB. Proper PATCHING ensures you the greatest possible benefit from TEXOTROPIC FIBERED ALUMINUM ROOF COATING. This extra care in the beginning pays off handsomely for years to come. |
Handling Information: For safe handling of the product, read the Material Safety Data Sheet (MSDS).