Texas Refinery Corp.
Protective Coatings


ACRYLENE FLOOR FINISH

USER BENEFITS:

  • PROTECTS MULTIPLE INDOOR SURFACES
  • DRIES QUICKLY TO HIGH GLOSS
  • EASY CARE, NON-YELLOWING
  • RUGGED WEAR     ONE STEP SEAL AND FINISH
ACRYLENE FLOOR FINISH is a modified acrylic product for indoor surfaces. It seals and finishes in one step and cures in 30 minutes to a high gloss. It is slip-resistant, detergent and waterspot resistant, and its hard, resilient finish impedes black heel marks.

Protects Multiple Surfaces

ACRYLENE FLOOR FINISH utilizes the latest advancements in polymer technology to help give floors lustrous, long-lasting protection. A synthetic liquid polymer emulsion, ACRYLENE FLOOR FINISH is perfect for use on all types of natural and synthetic indoor flooring, including:

Asphalt Tile
Sealed Wood
Rubber Tile
Terrazzo
Asbestos Tile
Marble
Vinyl Tile
Quarry Tile
Vinyl Asbestos Tile
Painted Concrete
Brick Pavers 
Smooth Concrete

Dries Quickly To High Gloss

ACRYLENE FLOOR FINISH dries to a high gloss luster in about  30 minutes. For greater shine, finish responds beautifully when buffed with standard equipment or polished with the new high-speed or ultra, high-speed burnishing machines.

Easy Care, Non-Yellowing

Exhibits outstanding resistance to most detergents commonly recommended for cleaning floors. Non-yellowing, it rarely needs stripping. High traffic areas coated with ACRYLENE may be spot patched without showing overlap.

Rugged Wear Seal and Finish

Dries to a hard, resilient finish which impedes black heel marks and, for added safety, is slip resistant. Normal cleaning will not harm the finish — it's both mild detergent and water spot resistant.

ACRYLENE FLOOR FINISH is an advanced sealer and finish all in one. 
 
FOR INDOOR USE ONLY

DIRECTIONS FOR USE:

Strip and clean floor using TRC's QUADRA-KLEAN Industrial Cleaner. Remove all soil and old finish. Using a medium strip mop or a lambs-wool applicator, apply ACRYLENE FLOOR FINISH in thin, even coats. If floor is badly worn, additional coats may be necessary. Allow 20 to 40 minutes drying time between coats, depending upon humidity and ventilation. The second coat should be applied lightly, never rubbed in. Worn areas may be patch-coated as needed. Clean by mopping with mild cleaner such as TRC's MULTI-KLEAN. Recoat as needed with ACRYLENE FLOOR FINISH.
 

COVERAGE RATES:

Smooth Texture 300 sq. ft. per gal.

Medium Texture 200 sq. ft. per gal.

Rough Texture 100 sq. ft. per gal.

Home|Specifications|Prev|Next|Print